Features

Design benefits

fitting comfort

Ballerina shape so little layering of material Flatlock seams, breathable mesh

precision

Slightly asymmetrical shape and narrow toe box for more precision.

grip

Vibram® XS grip outsole. Top and heel grip for hooking.

easy dressing

1 wide rip-tab for easy on/off and a secure fit

Design details

SHOE SHAPE

Arch shape, asymmetrical and significant tension in the heel (moderate level). This shape provides a high level of precision and power during your movements and optimises contact on small holds. Please note: this shape, suited to highly technical climbing, may reduce foot comfort slightly (especially on Greek-shaped feet). This is why we have chosen a moderate level to combine comfort and performance.

SOLE

XS GRIP Vibram® 4 mm rubber XS Grip is a soft, very grippy rubber for good traction, especially on flat or rounded holds.We used a soft rubber on the heel to conform to holds and to grip well when you plant your heel.

UPPER

We chose to develop the shoe's upper with synthetic leather lining (thickness= 2.5 mm) to prevent the shoe from loosening over time. We designed the tongue component to be highly breathable and provide foot comfort.

WEAR-AND-TEAR OF THE SOLE

Did you know? The better a rubber’s grip, the more it wears out, especially in indoor climbing. This is why we have chosen to work with a specialist recognised in the market since 1937, Vibram, and have carefully selected the rubber offering the best balance between strength and grip. Our tests show that on average, rubber wears away in 6 months, on the front and/or top of the shoes. This can be more or less fast, depending on how you place your feet.

A WEAR INDICATOR TELLS YOU WHEN TO RESOLE YOUR SHOE.

To help you know when to resole without risking damage to the shoe, our engineers have developed a wear indicator in the liner. The wear indicator appears when 2/3 of the lining has been worn away, which will give you time to make an appointment to have your shoe resoled. It should be noted that once resoled, your shoe will no longer have this wear indicator as it is in the original liner.

RESOLING SERVICE

Is your sole worn out? Do not throw away your shoe. Visit our Decathlon stores to find out where to resole your shoe. With your sole replaced, you can climb once again with the shoe already moulded to your feet. Warning: as soon as you see synthetic leather through the rubber, you should stop using it and get the sole repaired. If you pierce the synthetic leather, resoling will not be possible.

SIZING RECOMMENDATIONS

If you are an intermediate climber, we recommend selecting a shoe size a little tighter than your everyday shoes (e.g. 1/2-1 size smaller) but it's important they don't hurt, so that your foot can develop mobility, proprioception, and strength. If you are an advanced climber, we suggest you take the time to try different sizes (1 to 2 sizes below normal) to find the best compromise between comfort and compression for more force when pushing off.

CARE INSTRUCTIONS

Our first piece of advice is to never (under any circumstance) machine wash your shoes. Thermal and mechanical stress could damage them. We recommend that you wash them by hand, either with a sponge soaked in clean water or with a sponge soaked in soapy water (Marseilles soap), being sure to air-dry them at a stable temperate and avoid drying them on a radiator or in direct sunlight.

level of practice	intermediate
tightening type	rip-tab
climbing shoe shape	asymmetrical, moderate downturn
main material	synthetic
foot width	medium
practice motivation	i improve
condition	new
outsole technology	Vibram
climbing shoes flexibility	solf
resealable outsole	resealable outsole
style	two-tone

MEN'S CLIMBING SHOE - VERTIKA SOFT BLUE/OCHRE

Features

Design benefits

Design details

Specifications

Details

Composition

Usage & care

Care instructions

Cleaning